A weight distribution hitch with sway control is a type of towing setup that helps distribute the weight of the trailer across the tow vehicle's axles to improve handling and stability. Sway control is also included to minimize trailer sway, which can occur when there are gusts of wind or when a large vehicle passes by.The sway control in a weight distribution hitch with sway control works by using a friction system or a cam system to prevent the trailer from swaying.
Contact Now
Sway control refers to the mechanisms or techniques used to minimize trailer sway or fishtailing when towing a trailer. It is important to have proper sway control in place to ensure safe and stable towing.There are several methods of sway control, including:Weight distribution hitches: These hitches are designed to evenly distribute the weight of the trailer across the front and rear axles of the tow vehicle. This helps to improve stability and reduce sway.Sway control devices: There are various devices available that attach to the trailer and tow vehicle to reduce sway.
Contact Now
1.REDFOX 10000 pounds Weight Hitches(WDH)2.REDFOX’s hitch design reduces installation time. Design allows easy access to hitch ball shank. Features built-in sway control ball platform. Hitch head accepts different spring bar capacities for maximum versatility and reduced inventory3.Black polyester finish resists rust and corrosion. Lift brackets allow safe and easy hitch hook-up. Interchangeable spring bars fit left or right sides of hitch head.
Contact Now
A weight distribution hitch (also called a load-equalizing hitch or load leveler hitch) is essentially a hitch designed to distribute the tongue weight of a trailer across all four wheels of the tow vehicle. Any time a trailer is hooked up to your vehicle, it puts a certain amount of weight on the rear axle, which is called the tongue weight. The job of a weight distribution hitch is to even out that weight over the entire vehicle so that both the trailer and vehicle ride more levelly.
Contact Now
A pintle hook with ball is a towing system commonly used on trucks and trailers. It consists of a ball mounted on a pintle hook, which is a type of towing coupling designed to use a ring or loop as the attachment point for a trailer. The combination of the ball and pintle hook allows for a secure connection between the trailer and the towing vehicle.
Contact Now
The benefits of the use of a 1-7/8" Inch Hitch Ball include:Versatility: The 1-7/8" dimension is a frequent and extensively used hitch ball diameter, making it like minded with a large vary of trailers.
Contact Now
Wobble boat rollers are a type of roller system used for boat trailers. These rollers are mounted on arms that can pivot or "wobble" in order to accommodate different boat hull shapes and provide support during launching and retrieval. The movement of the rollers allows for easier loading and unloading of boats, reducing the risk of damage to the hull.
Contact Now
A hitch receiver tube, also known as a hitch receiver or trailer hitch receiver, is a key component of a towing system designed for connecting trailers, bike racks, cargo carriers, or other accessories to a vehicle.
Contact Now
The coupling device tube, also known as the hitch tube or receiver tube, is an essential component of a towing system. Its primary function is to provide a standardized connection point for hitch-mounted accessories, such as ball mounts, bike racks, or cargo carriers.The coupling device tube is typically installed at the rear of a vehicle, either bolted or welded to the vehicle's frame or chassis. It is designed to accommodate various hitch receivers, which can be easily inserted into the tube and secured with a hitch pin or lock.Once the hitch receiver is installed in the coupli
Contact Now
DescriptionREDFOX #10114 8000LB ATV Clevis Ball MountDEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and is rated to tow up to 8,000 pounds gross trailer weight and 800 pounds tongue weight (limited to lowest-rated towing component)VERSATILE USE. This trailer hitch ball mount comes with a 2 inch x 2 inch shank to fit virtually any industry-standard 2 inch receiver. The ball mount also has a 1-1/4-inch drop and 5/8-inch rise to promote level towingREADY TO TOW. Hitching up your trailer is easy with this 1-1/4 ball mount.
Contact Now
A trailer hitch step is a useful accessory that can be attached to the trailer hitch on the rear of a vehicle. It provides a convenient step up, making it easier to access the roof, trunk area, or bed of the vehicle. The step is typically made of sturdy materials, such as steel or aluminum, and can support the weight of an adult. It is a practical addition for vehicles with higher ground clearance, trucks, SUVs, or vans.Trailer hitch steps typically have the following features:Universal Fit: Most trailer hitch steps are designed to fit any standard 2-inch hitch receiver.
Contact Now
Solid shank dual ball adjustable hitches are towing accessories that are used to connect a trailer to a tow vehicle. These hitches have two different sized hitch balls on a solid shank, allowing the user to easily adjust the hitch to fit trailers with different coupler sizes.The solid shank provides strength and stability, making it suitable for towing larger and heavier trailers.
Contact Now
An ATV ball mount is a system used to attach a trailer ball to the again of an all-terrain car (ATV). This permits the ATV to tow a trailer or different attachments. The ball mount normally consists of a receiver hitch that is connected to the ATV's frame, alongside with a ball and a locking mechanism to impenetrable the trailer hitch in place.
Contact Now
The automobile towing ball, also commonly referred to as a trailer hitch ball, is an essential component of a towing system that enables vehicles to tow trailers or other heavy loads. It is a spherical ball that is securely attached to the rear of a vehicle, allowing it to connect with a trailer's coupler.The towing ball primarily functions as the connection point between the vehicle and the trailer. It provides a secure and stable attachment, allowing the vehicle to safely tow the load.
Contact Now
Trailer Hub Features:1. Bearings: Trailer hubs typically have high-quality bearings that allow for smooth rotation of the trailer's wheels. These bearings are often sealed to prevent water and dirt from entering, providing increased durability.2. Grease fittings: Some trailer hubs have grease fittings, which allow for easy lubrication of the bearings. Greasing the bearings regularly helps to maintain optimal performance and extend their lifespan.3. Dust caps: Dust caps are installed on the hub ends to protect the bearings from debris, moisture, and other contaminants.
Contact Now
A trailer jack is a device used to lift and lower a trailer for coupling and uncoupling from a vehicle, as well as for support when the trailer is parked. It typically consists of a steel tube with a jack handle for manual operation, a crank mechanism or motor for raising and lowering, and a base plate or wheel for stability. Trailer jacks come in various weight capacities and designs to suit different types of trailers and towing applications.
Contact Now
This pintle hook is a hitching device for trailers that doesn't require a hitch ball. It consists of a stationary plate with a mounted ring that rotates freely. This ring is connected to the trailer tongue or drawbar via a bolt, which allows it to pivot around the pintle hook. Pintle hooks are commonly used on heavy-duty trailers, as they offer more weight capacity and stability than hitch ball setups.
Contact Now
Product descriptionA bumper hitch receiver, also known as a bumper-mounted hitch, is a towing accessory that allows you to attach a trailer or other towable equipment to the rear bumper of your recreational vehicle (RV). It provides a convenient and secure way to tow small trailers, bikes racks, or cargo carriers behind your RV.The bumper hitch receiver is typically made of heavy-duty steel and designed to withstand the weight and stresses of towing.
Contact Now
Multi ball mountA multi-ball mount is a type of trailer hitch that allows you to attach a variety of tow balls with different sizes and weight capacities. This allows you to easily tow trailers of various sizes and types without having to constantly change the hitch or tow ball.The multi-ball mount typically has a receiver tube that inserts into the trailer hitch receiver on your vehicle. It has multiple holes to accommodate different-sized tow balls, which can be easily switched out depending on your towing needs.
Contact Now
In Europe, the tow ball, also known as a tow hitch, follows specific regulations and standards for safety and compatibility. The European standard for tow balls is known as ISO 50 and includes several requirements that manufacturers must adhere to.One key difference in European tow balls is the standardized size. In Europe, the most common size for tow balls is 50mm (approximately 2 inches) in diameter, compared to the 2 inches and 2 5/16 inches commonly used in North America.Another important aspect of European tow balls is the specified weight ratings.
Contact Now
Product descriptionA hitch pin is a pin with a head and a hole at one end that is used to secure a trailer hitch or other towing accessory to the receiver on a vehicle. It is inserted through the hole in the receiver and the corresponding hole in the hitch or accessory, and then secured with a clip or lock. The hitch pin helps to keep the hitch or accessory securely attached to the vehicle, providing a safe and reliable connection for towing.Hitch pins are typically used to secure various types of attachments to vehicles, such as trailers, tow bars, and other implements.
Contact Now
A fixed shank hitch cargo carrier is a cargo carrier that is designed to be mounted to the hitch of a vehicle. It has a fixed shank, meaning the carrier is permanently attached to the shank and cannot be removed or adjusted. This type of cargo carrier is typically more secure and sturdy compared to carriers with adjustable shanks.
Contact Now
Adjusting the ball mount of a trailer is an important step in ensuring safe and proper towing.The ball mount is the component that connects the trailer hitch to the towing vehicle.By adjusting the height of the ball mount, you can achieve a level and balanced towing setup.Here's a step-by-step guide on how to adjust the ball mount of a trailer:Assess the trailer and towing vehicle: Before making any adjustments, examine both the trailer and the towing vehicle.Determine the height and weight requirements of the trailer and consider the specifications of the towing vehicle.Measure the traile
Contact Now
1-7/8 inch hitch ballHitch ball is a component that is attached to a trailer hitch to help connect the trailer to the tow vehicle. The hitch ball has a threaded shank that is screwed into the trailer hitch receiver, with a lock washer and nut holding it in place. The trailer coupler then fits over the hitch ball and is secured with a locking mechanism to keep the trailer attached to the tow vehicle while in use.
Contact Now
