Sway control refers to the mechanisms or techniques used to minimize trailer sway or fishtailing when towing a trailer. It is important to have proper sway control in place to ensure safe and stable towing.There are several methods of sway control, including:Weight distribution hitches: These hitches are designed to evenly distribute the weight of the trailer across the front and rear axles of the tow vehicle. This helps to improve stability and reduce sway.Sway control devices: There are various devices available that attach to the trailer and tow vehicle to reduce sway.
Contact Now
A weight distribution hitch with sway control is a type of towing setup that helps distribute the weight of the trailer across the tow vehicle's axles to improve handling and stability. Sway control is also included to minimize trailer sway, which can occur when there are gusts of wind or when a large vehicle passes by.The sway control in a weight distribution hitch with sway control works by using a friction system or a cam system to prevent the trailer from swaying.
Contact Now
A weight distribution hitch (also called a load-equalizing hitch or load leveler hitch) is essentially a hitch designed to distribute the tongue weight of a trailer across all four wheels of the tow vehicle. Any time a trailer is hooked up to your vehicle, it puts a certain amount of weight on the rear axle, which is called the tongue weight. The job of a weight distribution hitch is to even out that weight over the entire vehicle so that both the trailer and vehicle ride more levelly.
Contact Now
1.REDFOX 10000 pounds Weight Hitches(WDH)2.REDFOX’s hitch design reduces installation time. Design allows easy access to hitch ball shank. Features built-in sway control ball platform. Hitch head accepts different spring bar capacities for maximum versatility and reduced inventory3.Black polyester finish resists rust and corrosion. Lift brackets allow safe and easy hitch hook-up. Interchangeable spring bars fit left or right sides of hitch head.
Contact Now
Towing Starter kits Towing starter kits usuaully includes one trailer ball, one trailer ball mount, and one pair of hitch pin clips, they can be installed together and packaged in one display box. To save cost and space, several pieces towing starter kits can be packaged in same one carton.
Contact Now
2 inch tow ball2 inch tow ball is a hitch ball of dimension 2” ball diameter, 3/4” shank diameter and 2-1/2” shank length. The shank dia and shank size can be different.Product Details1.Stainless Steel two inch Hitch Ball 2”x3/4”x2-1/2” 3500lbs2.Good great #316 stainless metal cloth affords the ball a long-lasting resistance to rain, grime and rust.3.The hitch coupler ball comes with stainless metal hex nut and stainless steel helical lock washer.
Contact Now
In Europe, the tow ball, also known as a tow hitch, follows specific regulations and standards for safety and compatibility. The European standard for tow balls is known as ISO 50 and includes several requirements that manufacturers must adhere to.One key difference in European tow balls is the standardized size. In Europe, the most common size for tow balls is 50mm (approximately 2 inches) in diameter, compared to the 2 inches and 2 5/16 inches commonly used in North America.Another important aspect of European tow balls is the specified weight ratings.
Contact Now
A trailer jack is a device used to lift and lower a trailer for coupling and uncoupling from a vehicle, as well as for support when the trailer is parked. It typically consists of a steel tube with a jack handle for manual operation, a crank mechanism or motor for raising and lowering, and a base plate or wheel for stability. Trailer jacks come in various weight capacities and designs to suit different types of trailers and towing applications.
Contact Now
If you're referring to securing a tow ball using a pin, here's a brief explanation:When attaching a tow ball to a tow bar, it needs to be secured properly to ensure a safe towing experience.
Contact Now
A trailer hitch step is a useful accessory that can be attached to the trailer hitch on the rear of a vehicle. It provides a convenient step up, making it easier to access the roof, trunk area, or bed of the vehicle. The step is typically made of sturdy materials, such as steel or aluminum, and can support the weight of an adult. It is a practical addition for vehicles with higher ground clearance, trucks, SUVs, or vans.Trailer hitch steps typically have the following features:Universal Fit: Most trailer hitch steps are designed to fit any standard 2-inch hitch receiver.
Contact Now
Solid shank dual ball adjustable hitches are towing accessories that are used to connect a trailer to a tow vehicle. These hitches have two different sized hitch balls on a solid shank, allowing the user to easily adjust the hitch to fit trailers with different coupler sizes.The solid shank provides strength and stability, making it suitable for towing larger and heavier trailers.
Contact Now
Product descriptionA bumper hitch receiver, also known as a bumper-mounted hitch, is a towing accessory that allows you to attach a trailer or other towable equipment to the rear bumper of your recreational vehicle (RV). It provides a convenient and secure way to tow small trailers, bikes racks, or cargo carriers behind your RV.The bumper hitch receiver is typically made of heavy-duty steel and designed to withstand the weight and stresses of towing.
Contact Now
This pintle hook is a hitching device for trailers that doesn't require a hitch ball. It consists of a stationary plate with a mounted ring that rotates freely. This ring is connected to the trailer tongue or drawbar via a bolt, which allows it to pivot around the pintle hook. Pintle hooks are commonly used on heavy-duty trailers, as they offer more weight capacity and stability than hitch ball setups.
Contact Now
DescriptionREDFOX #10114 8000LB ATV Clevis Ball MountDEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and is rated to tow up to 8,000 pounds gross trailer weight and 800 pounds tongue weight (limited to lowest-rated towing component)VERSATILE USE. This trailer hitch ball mount comes with a 2 inch x 2 inch shank to fit virtually any industry-standard 2 inch receiver. The ball mount also has a 1-1/4-inch drop and 5/8-inch rise to promote level towingREADY TO TOW. Hitching up your trailer is easy with this 1-1/4 ball mount.
Contact Now
An adjustable ball hitch is a type of trailer hitch that allows you to change the height of the trailer ball, also known as the coupler, to match the height of the trailer's coupler. This is useful when towing different trailers with varying heights.To adjust the ball hitch, follow these steps:1. Begin by removing the pin or lock holding the ball mount in place.Slide the ball mount, which is the part that holds the trailer ball, up or down on the receiver tube to the desired height.2. Align the holes on the ball mount with the holes on the receiver tube.3.
Contact Now
A frame trailer coupler is a device used to connect a trailer to the towing vehicle. It is typically mounted to the front end of the trailer's A-frame or tongue, and it allows the trailer to be securely attached to the hitch on the towing vehicle. The coupler consists of a ball socket that fits over the hitch ball on the towing vehicle and a locking mechanism that keeps the trailer connected during towing.
Contact Now
A hitch receiver tube, also known as a hitch receiver or trailer hitch receiver, is a key component of a towing system designed for connecting trailers, bike racks, cargo carriers, or other accessories to a vehicle.
Contact Now
Adjusting the ball mount of a trailer is an important step in ensuring safe and proper towing.The ball mount is the component that connects the trailer hitch to the towing vehicle.By adjusting the height of the ball mount, you can achieve a level and balanced towing setup.Here's a step-by-step guide on how to adjust the ball mount of a trailer:Assess the trailer and towing vehicle: Before making any adjustments, examine both the trailer and the towing vehicle.Determine the height and weight requirements of the trailer and consider the specifications of the towing vehicle.Measure the traile
Contact Now
A folding shank hitch-mounted cargo carrier is a type of storage solution that can be attached to the rear of your vehicle using a hitch receiver. It provides additional space for transporting luggage, equipment, or other large items outside of your vehicle's interior.The "folding shank" feature refers to the carrier's ability to fold up when not in use, allowing for easier storage and convenience.
Contact Now
A golf cargo carrier is a device that can be attached to a golf cart or used independently to carry golf clubs, bags, and other accessories. It provides additional storage space and helps make transportation of golf equipment easier and more convenient. There are different types of golf cargo carriers available such as rack-style carriers, hitch-mounted carriers, or even cargo trailers specifically designed for golf equipment.
Contact Now
A trailer car hitch step, also known as a hitch step or trailer step, is a small platform that attaches to the trailer hitch of a vehicle. It provides a convenient and secure step for easier access to the bed of a truck or roof rack, especially for loading or unloading cargo. Some hitch steps also come with additional features such as a non-slip surface, built-in reflectors for increased visibility, and can also serve as a buffer to protect the rear of the vehicle from minor impacts.
Contact Now
I apologize for any confusion, but there isn't a specific hitch component called a "bumper hook receiver." However, let me provide some information on bumper-mounted receiver hitches.A bumper-mounted receiver hitch is an accessory that allows you to add a hitch receiver to the bumper of a vehicle. It is typically designed for vehicles that do not have a factory-installed receiver hitch or those whose bumpers are capable of supporting towing or carrying loads.The bumper hook receiver serves the same purpose as a regular hitch receiver, providing a standardized and secure
Contact Now
The purpose of an ATV spherical hitch device is to provide a secure and reliable connection between an ATV (All-Terrain Vehicle) and a trailer. It is designed specifically for off-road vehicles such as ATVs and allows for easy attachment and detachment of trailers, making it convenient for hauling various types of cargo or equipment.The spherical design of the hitch allows for increased flexibility and maneuverability, ensuring a safe towing experience even in rugged terrain. Overall, the ATV spherical hitch device enhances the functionality and versatility of an ATV by enabling towi
Contact Now
Multi ball mountA multi-ball mount is a type of trailer hitch that allows you to attach a variety of tow balls with different sizes and weight capacities. This allows you to easily tow trailers of various sizes and types without having to constantly change the hitch or tow ball.The multi-ball mount typically has a receiver tube that inserts into the trailer hitch receiver on your vehicle. It has multiple holes to accommodate different-sized tow balls, which can be easily switched out depending on your towing needs.
Contact Now
